We recently wrote about muck pits and dealing with manure at horse facilities and received comments about stabling time; some saying that shorter times in stalls are better for horses. We completely agree. The longer a horse is stabled indoors, the more likely it is that the animal will be standing in urine-soaked bedding for at least part of the day. And we all know ammonia causes problems.
We want the air inside our barns to be as clean as the air outside the barn. Blackburn Architects’ designs stress aerodynamic ventilation, strategic natural light, and passive solar heating and cooling in our equestrian facilities.
When John Blackburn was beginning to design horse facilities more than 30 years ago, he found combining regionally-appropriate architectural elements with aerodynamic airflow principles created pleasing, healthy spaces for equines and their caregivers. Even early on in his career, heading into his barns was refreshing. “In August,” he has said, “in the dead of summer, when there was no wind – your hair would lift” from the natural ventilation created by the proper placement of the barn on a site, and the use of two engineering principles, which Blackburn Architects has employed in every design then and since:
1. The Bernoulli Principle – As air blows across a surface, e.g. a bird’s wing, it creates lift. Barn placement on a site is critical. If possible, a barn should capture the prevailing summer breezes (for horses you’re always more concerned with cooling rather than warming).
Inside the barn, air needs to move up and out. Blackburn frequently specifies ridge line vents in our designs. The vertical ventilation rids the barn of odors, pathogens and infectious bacteria that could otherwise be transported from horse to horse.
Even in cold climates like Montana, Blackburn Architects designs for maximum ventilation in the winter. “A horse gives off a tremendous amount of humidity; a lot of bacteria and in a contained area – like a stall – that’s an incubator for disease. I don’t care how cold it is where you live, you want to ventilate your barn year-round,” explained John Blackburn.
2. The Chimney Effect – Maximizing natural light in a barn creates a healthy environment by helping to “sterilize” the spaces. For example, as the sun moves across the sky and a band of light travels through a stall – perhaps through the upper portion of an exterior Dutch door left open – it helps to dry and evaporate urine. Blackburn Architects’ spaces have a lot of windows, and skylights. Vented skylights glazed with a translucent polycarbonate panel running the length of the barn are hallmarks of our barns. The light source provides a low cost, shatter-proof feature that diffuses the light, thus eliminating harsh shadows, which could cause horses to spook. “My barns are designed to function throughout the day without the use of artificial lighting, except in enclosed rooms such as bathroom/laundry,” John Blackburn explained.
“A horse is designed to live outside in the wild. If it wants to get out of the sun, it’ll run under a tree. If it wants to get out of the wind, it’ll run behind a hill. This natural, healthy way of living is what we strive to create with our barns so that our athletic partners have the best chance of long, healthy lives – indoors or out.”
If you want to learn more, Penn State Extension has a very informative article: https://extension.psu.edu/horse-stable-ventilation.
Q: Dear John,
We have a house on 3 acres of land with a 4-stall metal barn. It’s been years since horses have been on the property. The pasture and paddock are overgrown with trees and shrubs and are now essentially wooded areas. The fences are in disrepair. The area is hilly. We need to see if we can flatten an area to use as a riding ring. Drainage will be an issue. Basically, we need to figure out a way to rework what’s here to maximize what we can use. We understand that it will be a large undertaking and we want to properly plan to do it right and complete in several stages over a couple years.
Your website has been helpful and informative, but any additional information would be greatly appreciated.
A: Dear Midwestern Equestrian,
Almost weekly, our office receives calls or emails from people who own a property and plan to put horses on it. Maybe there’s already an old structure there. Or perhaps they want to start from scratch. They ask for advice on where to begin.
Midwestern Equestrian, I suggest you start with a site plan. Even with an existing structure (your 4-stall barn), there are so many benefits to putting together a “roadmap” for future changes/improvements. And since you want to put four horses on three acres, efficient planning is critical. Consider that there are three major categories of costs when planning to bring horses onto your property: 1. Operational, 2. Environmental, and 3. Infrastructure. Proper planning will save you money in all three areas. Fewer roads, less fencing, better drainage all ensure that the whole farm, not just the horse barn but the entire collection of structures on the site, operates efficiently and safely.
Operational Considerations: First locate where you’ll put the horses – where is your turnout? Where will you store hay, equipment, or vehicles? Do you have access for manure pickup, large-truck deliveries, guests or visitors? Minimizing the number of steps necessary for your daily routine (turnout, stall mucking, etc.) will save labor time, which of course you know is money in the farm biz. Planning will also preserve space for paddocks.
Environmental Considerations: Figure out structure placement within your acreage. It’s important to properly orient any new buildings in the landscape. We design our barns to generate their own ventilation, placing them perpendicular to prevailing summer breezes. (One of many design considerations for maximizing light and ventilation, which is a subject I’ve written about often.) Additionally, placing structures where the land will drain easily makes good sense.
Infrastructure Considerations: Fewer roads to maintain means fewer dollars spent.
Creating a master plan does not mean that every part of it needs be built at once. The plan may end up taking years to implement, but as each new structure or paddock is added, it isn’t done in the usual haphazard way. It will save you from asking, “You know, I could use a tractor shed somewhere?” Even those with very limited budgets should consider getting the advice of an expert at the planning stage, given the importance of the optimum farm layout.
Hope this helps in your planning, and good luck with your farm!
In this on-going series, John Blackburn offers insight into component parts of equestrian facilities. With more than 35 years’ experience in the design of horse barns, he’s seen his share of good, bad and worse. In this installment, he gives advice on stall flooring. Still as applicable as ever, we’re reposting Sushil Dulai Wenholz’ article from The Horse, Sept 1, 2001 (added a few updates, too).
By Sushil Dulai Wenholz
You give a lot of thought to your horse’s health and happiness. You groom him until he gleams, swaddle him in boots and blankets, carefully monitor his diet, and expend considerable effort and expense making sure he’s comfortably bedded. But have you thought about what lies beneath that soft bed? In essence, the stall floor is the box spring beneath your horse’s mattress, and it’s every bit as important as what goes on top–perhaps more so.
No matter how nice the bedding, a poorly constructed floor can lead to respiratory troubles from ammonia gases, thrush from trapped moisture, achy joints from uneven or too-hard surfaces, and injury from slippery or abrasive materials. In addition, a poor floor can mean wasted bedding and extra labor for you.
A good stall floor starts with a good construction plan. John Blackburn, senior principal of Blackburn Architects, a 34-year-old firm that has designed more than 400+ barns in 35 states; and Peter Gibbs, Extension Horse Specialist at Texas A&M University, outline the steps involved in building a floor that will keep you and your horse happy, whether you’re revamping an existing stall or building a brand new barn from scratch.
Starting From Scratch
1. Pick the location. If you’re building a barn, you have the luxury of choosing the best site. Look for an area that’s dry or at least easy to drain. Avoid steep slopes, areas that are consistently wet, and locations that are subject to water runoff during heavy rains or snow melt. In terms of soil, you’re basically stuck with whatever is normal for your region. But if you have it, soil that packs tightly is ideal, says Blackburn, because it will provide a tough surface that isn’t too hard or abrasive.
2. Dig to the base. Whether you’re starting from scratch or redoing an existing stall, you need to dig down to a well-draining layer of soil. This will give urine and other moisture a path to drain away from your horse. Expect to excavate at least one foot deep over the entire stall, says Blackburn. You might have to go deeper, depending on local soil conditions.
3. Level the ground. You should level out that base layer to help make sure the surfaces above it are level. A nice, even plane puts less stress on your horse’s legs than an uneven floor.
4. Compact the base and fill. Even if the floor starts out flat, Gibbs explains that extended use can create a holey or uneven surface, especially with dirt or stone-dust flooring. To form a firm foundation that can withstand daily wear and tear for extended periods, compact the floor. You can use a hand roller, a motorized, hand-held compactor or “settler,” or some other heavy pounding tool to do the job.
First, compact the layer you’ve uncovered and leveled. Then begin adding layers of dirt or stone dust. “The important thing is to install the flooring in layers and tamp it at each layer,” says Blackburn. He recommends using three-inch layers for dirt or one- to two-inch layers for stone dust. Compact each layer “until you think it can take the abuse of hooves kicking at it,” he adds, noting that there isn’t a standard measure to go by.
To ensure good drainage away from the building, add layers until your floor’s surface is 12 to 18 inches above the natural grade around the barn, says Blackburn. “You want to get the moisture to drain through the flooring and away from the stall and barn,” he explains. In addition, this protects the floor from high water levels outside that might otherwise easily flood the stall.
Now you’re ready to add the floor itself. Next you’ll find basic installation information for several common types of flooring.
Adding the Flooring
Dirt–If you plan to have a dirt floor, and local soil drains exceptionally well, you’re done. Most soils, however, drain moderately well at best, so you’ll probably want to help it along. One option is to grade the top layer of dirt slightly (no more than three degrees), so that moisture runs off to exit the barn or stall through an outlet in the corner (or through the stall door to the aisle).
You could also make a “leach hole,” or simple drain, inside the stall. To do this, dig a hole about three feet in diameter and deep enough to reach that bottom, well-draining layer of soil at the base you created. Then fill the hole with varying sizes of rock (or alternating layers of sand and gravel), starting with large gravel chunks at the bottom and working toward stone dust at the top. Tamp into place and cover with dirt to even out the floor.
Stone Dust–Blackburn believes that stone dust (also known as crusher run, screenings, or quarter-inch minus) makes a better floor than dirt, “because it can compact well and still permits drainage.” However, he does recommend adding a subsurface drainage system to enhance flow-through. To do this, lay filter fabric over the floor, top it with a layer of crushed gravel, then add three to five inches of stone dust. As you did with the base, compact the stone dust after each one- to two-inch layer. When you’re done, water the floor, tamp it down tight again, and let it settle overnight. Fill in any holes or depressions the next day.
Another idea is to install a drainpipe under the stone dust floor. “I feel that this helps drain the moisture away from the stall area and allows you to flush the stall with moisture to cleanse the flooring,” explains Blackburn. “Otherwise, it could drain into the dirt and stone and stay there, providing odor and a breeding ground for bacteria.”
To lay pipe, first dig a swale–a sloped ditch about one foot deep. Lay perforated pipe into the swale (you want a piece long enough to provide drainage away from the building, notes Blackburn). Cover the pipe with filter fabric, then fill the swale with crushed gravel. Now add and compact your stone dust as stated previously.
Plastic Grid–Plastic grid flooring comes in many variations, but the basic idea is the same for all floors: To provide a 100% permeable floor plus a level, stable, durable surface. Installation instructions vary by manufacturer; however, most recommend laying the grid over a well-draining subsurface (such as stone dust) so that moisture not absorbed by bedding will drain away. Usually, the holes in the grid (which create the excellent drainage) are filled with stone dust.
Rubber Mats–As with grid systems, rubber mats (and similarly, rubber pavers, which look like rubber bricks) vary in design, thickness, texture, etc., from one manufacturer to the next. Likewise for installation instructions, although most want you to measure stalls so that mats fit snugly against each other and the walls. Unlike grids, however, mats and pavers are meant to trap moisture above the surface, where it can be absorbed by bedding. Moisture can seep through the seams (or possibly the rubber itself). So, flooring experts recommend that you lay mats over a well-draining subsurface, such as one of the crushed stone systems mentioned earlier, or over relatively nonporous materials such as concrete and asphalt that can be easily disinfected.
Asphalt–You can lay an asphalt floor yourself, if you’re willing to find a supplier, rent equipment, and learn the proper way to apply, rake, and settle it. However, it can be a tricky process. As Blackburn notes, “The right mix of asphalt is important. It should be raked as it’s installed, then hand rolled. I would imagine that hiring a professional would be advisable.”
He also suggests that you grade asphalt floors with a crown of one-eighth inch per foot in order to sustain drainage. “With a flat surface, the urine puddles and leaves the horse standing in dampness, potentially causing all kinds of hoof issues,” he explains. The slope will also facilitate drainage when the stall is washed or disinfected. Blackburn recommends the use of aggregate, or “popcorn,” asphalt, which offers a non-slip texture. And he strongly urges the use of rubber mats or rubber pavers to cushion this relatively rough surface.
Concrete–Many people are comfortable mixing and pouring their own concrete–an easier process than laying asphalt. For larger projects, you might want to hire outside assistance. Although moisture can seep through concrete over time, this footing is not as porous as stone dust. So, Blackburn recommends grading it at a rate of one-eight inch to one-quarter inch per foot to allow for drainage. Concrete should be cushioned with rubber mats or pavers, he adds, to reduce the risk of injury and musculoskeletal stresses that this hard flooring could cause.
A Note on Cost
Before you begin stall floor construction, you should create a budget for the project. However, as Blackburn notes, “The cost of different options can vary dramatically based on the number of stalls, location, and the material used,” as well as the specific suppliers, consultants, and equipment rental agencies with which you might deal.
For instance, says Blackburn, “I have found that the cost of asphalt flooring can range widely from area to area. And some suppliers require that a large quantity be ordered of the type and mix you need before they will supply it at a reasonable price.” Therefore, it could actually be more expensive, per stall, to floor a smaller barn than a larger barn. It’s important to contact local companies for estimates before you start the job. (For mass-manufactured, nationally distributed products like most rubber mats and plastic grid systems, you can check pricing with the manufacturers, many of whom have web sites.)
As you start compiling price quotes and creating a budget, Blackburn cautions that you consider not just the initial expense of purchase and installation, but also long-term costs. A dirt floor might be virtually free to install except for labor, but could be expensive in terms of labor over the long run. Rubber mats might be pricey at the start, but could pay for themselves through longevity, ease of care, and reduced bedding.
Also consider the stall flooring material can greatly impact the amount of bedding you’ll need to use. For instance, a stall floor with interlocking rubber brick can cut your bedding in half which can save on barn operations, offsetting increased installation costs.
Additional options for flooring include adhered cushioned or foam filled. To conclude, all stall flooring has an impact on the comfort of your horse, the material cost of installation, bedding requirements and your ability to clean and sanitize the stalls.
ABOUT THE AUTHOR
Sushil Dulai Wenholz
Sushil Dulai Wenholz is a free-lance writer based in Lakewood, Colo. Her work appears in a number of leading equine publications, and she has earned awards from the American Horse Publications and the Western Fairs Association.
1. Blackburn designs stalls of all sizes, but the most common is 12’x12’. 16’x16’ is often requested for larger horses, but with more space comes increased maintenance, a need for more bedding and a bigger area to clean. Larger stalls can, therefore add considerably to the cost of building a barn by:
a. Adding to the overall length and/or width of a barn.
b. Requiring roof framing to be increased from 2×10’s to 2×12’s or even greater.
c. Increasing the span of the framing lumber.
2. Partitions between stalls should be at least 8 feet high, but they don’t have to be solid from top to bottom. Barred or mesh portions on the top enhance ventilation. This also has the benefit of allowing horses to see their companions — and provides easy observation of the horses by their owners. The down side is the increased ventilation between stalls can increase the risk of bacterial infection between horses. For the same reason, doors that are open on top increase light and ventilation. Bars must not be more than 2 to 3 inches apart, and openings should not be more than 2 inches across to prevent hoof entrapment.
3. Steel mesh or bar fronts on stalls allow an owner to look down the aisle or into the stall as they walk down the aisle and see their horses. The mesh is good for ventilation, too. The drawback is that bedding can be kicked into the aisles, so we recommend adding bedding guards. Welded steel mesh is typically stronger than bars but the horizontals tend to collect dust and can add to barn maintenance.
4. Doors should be at least 4 feet wide. This is wide enough for a wheelbarrow to enter the space or for a horse and handler to exit or enter the stall. Sliding doors are preferred over swinging doors. If you must use swinging doors, remember to install them to swing outward. You’ll have a major problem if a horse goes down and the door swings to the inside. Additional safety reasons for outward swinging doors include:
a. Prevention of an unlatched door swinging open accidentally, or the wind catching it.
b. Added visibility of looking down an aisle and recognizing that a stall is open and empty. (Handlers need to leave stall doors open when the horse is turned out. This also makes it easier when bringing the horse back to the stall – you don’t have to open it.)
5. We recommend rounded edges in stalls and anywhere in the barn where horses have access. A casting rail (which can be a groove in the wall or a 2-by-4-inch rail bolted low to the wall), provides something for the horse to catch his foot on when rolling to avoid getting cast.
6. Provide for easy access to the stall for feed buckets without opening and closing the door. Place in one of the front corners adjacent to the aisle.
7. Automatic waterers have the advantage of offering constant fresh water, but be sure to buy a model that is easy to keep clean. If you don’t want automatic waterers, install water hydrants between every couple of stalls and provide for ample drainage for drips and overflows. Don’t forget to frost-proof them in climates where pipes are apt to freeze.
Hi John. I hope you had a wonderful summer!
Q: Our covered arena has been put to good use throughout the last year, but we really need lights to make it even more beneficial to our program. Given your expertise and experience with equestrian barns and arenas, I was hoping you might be able to give us some guidance.
We are having a hard time determining exactly what kind of and how much lighting is necessary. Do you have a formula that you use?
Any help you can provide would be greatly appreciated. I look forward to hearing from you!
Dear Undercover Rider:
Glad to hear all’s well.
I would be happy to offer some guidance on lighting for your arena.
A: I typically recommend approximately 35 to 50 foot candles per sq ft of light on the arena floor in order to provide a sufficient amount of light for a variety of functions. It also depends on the amount of reflective surfaces you have and the color of those surfaces including the arena floor material.
If you are anticipating a variety of entertainment type functions such as charity events, parties, etc you may want to consider a variety of type mood lighting for different events.
There are also a variety of type lights to consider such as metal halide, LED, HD, etc.
There are other factors to consider as well such as initial cost, operating cost, maintenance or lamp life and also the design of the fixture (bird protection, fire safety, etc.)
We are beginning to use LED more often now. I hope that helps!
On Earth Day, April 22 2009, Blackburn Architects launched Greenbarns®, a line of pre-designed barns for eco- and cost-conscious horse owners. Eight years later, with heightened global warming and environmental worries, the line is more popular than ever. Horse owners, we know, tend to be highly aware of and concerned for, the natural world.
John Blackburn’s mission for the past 35 years has been to deliver exceptional design through the creative blending of human need, horse need, environmental stewardship, science and art. When our studio created Greenbarns®, we did so to make healthy barns available to more of the country’s estimated two million horse owners. The barns are designed to operate without electrical or mechanical dependence and their roofs can be energy producing. “Imagine how much energy you could generate — not just save, but actually produce — if you equip millions of roofs with active solar panels,” John explained. “The energy can be sold back to the gird or stored and used on the property.”
Using energy-saving “passive design” elements, Greenbarns® rely on natural lighting and ventilation. Eco-friendly materials and finishes are paired with optional add-ons such as solar panels and greywater collection systems.
When a client in southern California asked us for a Greenbarn® suited to their small, two-acre property, we delivered a customized 3-stall barn that included a composting station and solar panels. The barn and paddock take up just 1/2 an acre and are located behind the owner’s existing home. Green materials include: light-colored roofing with a highly reflective finish, recycled content concrete blocks, low VOC stains/sealants, FSC certified wood products. Green systems include a manure composting station, and solar panels.
Blackburn Architects has formed partnerships with leaders in sustainable technology to connect our clients with the latest in composting, greywater and rainwater harvesting, solar power, and engineered bamboo products. Site planning, design modification, and design of other facilities such as storage buildings or residences are available as additional services in conjunction with the Greenbarn® line.
Midwesterner, architectural designer (almost ready to pass her final exam), and so much more. Let’s get rolling. Where are you from?
Vanderbosch is Dutch, meaning “of the woods.” I grew up in Fort Wayne, IN where my Dad’s side of the family is from and where my Mom moved after college. Her family is from southern Indiana and western Kentucky. Did you know there’s an actual fort there? Not many people do. It’s named after Revolutionary War General “Mad” Anthony Wayne. It’s a small city that feels like a small town. Folks from Ft. Wayne are Midwesterners through and through, very friendly, and I love it there.
What was it about growing up in Ft. Wayne that made you think, “I want to be an architect?”
I guess that does go along with growing up in the Midwest, where’s there’s lots of land and doing projects is very easy. My family was very involved with making home improvements. We were always working on projects: the bathroom, retiling the kitchen, putting in a patio in the backyard. Meticulous work. It’s probably related that my siblings and I have chosen detail-driven professions. I have three brothers, the oldest, Joey, is a dentist, Scott, is in food chemistry and my youngest brother, Mark, is studying to be an accountant and will go to grad school this fall to get his MBA.
In 8th grade I discovered architecture. A teacher assigned a book report, I think it was on the topic of biographies, and brought in all different books of famous people and I picked up the one on Frank Lloyd Wright. It had beautiful pictures of Frank Lloyd Wright houses. Until then I knew interior designer was a thing, and DIY, but I didn’t know architecture was a job. That you could do that for a living. I remember thinking, ‘That looks really cool; that’s what I want to do.’ I like being creative and putting things together to see how they work, which led me to interior design. But in class I’d ask, “can I move these walls?” and the answer was “no, the architect will do that.” That’s when I knew I wanted to be an architect. I could always do interior design as an architect, but I couldn’t go the other way.
I started at Purdue in interior design, then transferred to Syracuse University for architecture. Syracuse was intense, but the school has an amazing study abroad program. That’s what sold me on the school. I lived in London and Florence. It was a once-in-a-lifetime thing that I’m so glad I did.
I moved to DC for a job in 2012. At the time (during the recession), it was about finding a job. Any job. Ultimately, I got hired by a firm in Georgetown, which then downsized like so many at the time.
Luckily, shortly thereafter, you found Blackburn.
There came a time during the recession when I was trying to decide, ‘Do I stay in DC? do I move to Chicago? go back to Ft. Wayne?’ So many architects were unemployed. I sent my resume everywhere, including Blackburn Architects. When I came in for the interview, I remember that (now-fellow Project Manager) Cesar Lujan and John Blackburn were interested in me, my portfolio, asking questions, and I was so impressed. Turns out that early experience was very indicative of the supportive culture of the firm. To this day, my favorite things about working here include the personal interest, the flexible and supportive studio environment.
Describe your passions outside of work?
Good question. I like to do lots of things. I enjoy biking, and I bike to work unless it’s raining or below 40 degrees. It’s about 4 miles; all downhill cruise in the morning, and then all uphill home. Jenni Blackburn calls me “the little Dutch girl” because I have a little egg crate basket on the back of my bike and sometimes carry baguettes in there.
And photography. Mostly nature. My mom printed large scale pictures I took in the Adirondacks at Kinko’s, framed them and hung them up. Now my brother, who lives in Indianapolis, has them in his house. That stuff is fun. I go for views – it plays into architecture when a client says, ‘I want a view out my bedroom window.’ I like shooting landscapes that show the client what they’ll see in the future, especially wide-angle panoramas. I took some for a current client, and it was cool to see the progression as I’ve returned to the site over the seasons. We were there in the early summer for the first time, and everything was very green. And then we were there in the fall, so there were some leaves, but it was mostly bare; getting close to winter. The most recent visit was just a couple of weeks ago, and it’s spring. I’ve loved seeing how the site has changed over the year.
I know you sometimes travel with John Blackburn to visit project sites. Let’s end with a favorite JAB story?
Taking him “home” (to Ft. Wayne this past winter) for a project was a first. It was interesting, driving him around and pointing out ‘oh, that’s where I learned to play tennis, and that’s the kennel where my Mom got our Miniature Schnauzer, Sunny; where to go for dinner? Well Casa is right here and delicious.’ I think it was a lot bigger city than he was expecting. It’s not every day you can show John someplace he hasn’t seen before. He told me that when he was a boy, in Tennessee, he only got a couple of radio stations, and late at night, he would listen to Ft. Wayne AM radio. 1190 WOWO. They had the biggest antenna that broadcast the farthest, and he could listen to it. How’s that for random?
I’d say it’s high time for a salute to Ft. Wayne, IN! Thanks for bringing us the very talented Carol Vanderbosch, who is currently at work on a Net Zero Energy barn and Indoor Arena located somewhere in the Midwest, at a facility that offers inspiring year-round views.
Inside the Rider’s Home, Dressage Today, October 2016
Building Your Green Barn – Land Management, Equine Wellness, April/May 2016
Designing For Extremes, Equestrian Living Magazine, April 2016
When Barn Builders Dream, 2016 Tryon Equestrian Directory
Over Three Decades of Experience in Design Excellence, Metro Architect, March 2016
His & Hers with LA Pomeroy: John Blackburn, Elite Equestrian, January 2016
Find Barn. Add Architect. Say “Whoa” Inside Hook, December 2015
6 Barns Converted into Beautiful New Homes, Inhabitat.com. July 2015
After A Million-Dollar Makeover, Behold the Party Barn, The Wall Street Journal, June 2015
Home, Reimagined, Architectural Digest, June 2015
Barn Again, UnTacked Magazine, May 2015
Dressage Barn Gone Green, Dressage Today, April 2015
Building A Green Barn, Equine Wellness Magazine, April 2015
Lucky Jack Farm, Horse and Style Magazine, December 2014
Where Do You Stand on the Great Carriage Debate, Horse and Style Magazine, September 2014
Things to Consider When Purchasing Equine Property, Field Sport Concepts, September 2014
Sheik Island Horse Training Farm in Dade City on the Market for $4.5 Million, Tampa Bay Times, May 2014
John Blackburn Basics, California Horse Magazine, April 2014
My Kingdom, Mi Casa: Pegaso Farm, Horse Sport International, Issue 1, 2014
Barn Design Masterclass: How to Get the Best Barn While Working on a Budget, Equestrian Quarterly, Fall 2013
Fire Wind Water: Thoughtful Barn Design May Reduce Disaster Risk, Polo Magazine, September 2013
Barn Envy: Oakhaven Farm, Horse & Style Magazine, August 2013
Building an Eco-Friendly Horse Barn, Equine Wellness Magazine 2013
Let There Be Light, Equestrian Quarterly, Summer 2013
Colorful Kitchen Updates, Food and Wine Magazine, November 2012
Beauty and the Barn, DCmud, November, 2012
Staying ‘Stableminded’, The Zweig Marketing Letter, July 2012
How to Choose the Right Remodeling Professional for Your Needs, The Washington Examiner, June 2012
Returning Sagamore to Her Rightful Glory, The Equiery, April 2012
Seeing the Light, Stable Management e-blast, April 2012
Bank Barns, Acreage Life Magazine, March 2012
A ‘Bettor’ Racecourse: NYRA Discusses Improvements to Racetracks, The Saratogian, September 2, 2011
Barn Saver, Saratoga Living, Summer 2011
From Native Dancer to Native Son: Restoring Sagamore Farm, DCmud, June 22, 2011
Barn Beauty, Cowboys & Indians, July 2011
A Modern Sports Success Story Meets a Historic Racing Farm, The New York Times, May 21, 2011
A Handsome, if not Historic, Hotel, The Washington Post, May 22, 2011
A Dreamer’s Latest Long Shot, The Washington Post, May 17, 2011
Green Barns,Clemson World Magazine,Spring 2011
Good Barnkeeping, Horsemen’s Yankee Pedlar Magazine’s 2011 Barn & Arena Guide, Spring 2011
No More the Desert Nomad (reprint), Desert Mirage Arabian Horse Virtual Magazine, April 2011
In the Spotlight: Blackburn Greenbarns, Green Business Quarterly, March/April 2011
Re-Use Architecture, Chris van Uffelen, Braun Publishing AG, 2011
Green Building Materials for your Horse Barn, Holistic Horse Magazine, October/November 2010
They Love Horses, Don’t They?, DCmud, August 9, 2010
Building a Green Horse Barn, Equestrian Professional Newsletter, June 2010
Stables: Beautiful Paddocks, Horse Barns, and Tack Rooms, Kathryn Masson, Rizzoli Publications, April 2010
Fresh Air and Lots of Light? It’s Just Good Horse Sense, Architecture DC Magazine, Spring 2010
Ask the Experts, Dressage Today, March 2010
Build-On: Converted Architecture and Transformed Buildings, edited by Robert Klanten and Lucas Feireiss, Gestalten, 2009
Greenbarns: Sustainable Homes for Your Horse, Inhabitat.com, July 13, 2009
More Escapes At Home, Web Extra, Washington Spaces Magazine, Summer 2009
NYRA Details Track Season Giveaways, Daily Gazette, June 30, 2009
Sustainable Barns for Green Horse Owners, bestgreenhometips.com, June 9, 2009
Architect Launches Eco-Friendly Barn Designs, customhomesonline.com, June 3, 2009
Selling the Outdoor Room, Remodelers’ Journal, April/May 2009
Beautiful Bank Barn Renovation, Inhabitat.com, April 3, 2009
Safe Haven, Western Horseman, March 2009
Seeing Green, Stable Management, February 2009
Good Barnkeeping, The Horse, February 2009
Green, Greener, Greenest, Horse Connection Magazine, November 2008
Lighten Up, Stable Management, October 2008
Stable Environment, Keeneland Magazine, Summer 2008
Arena Considerations, Western Horseman, June 2008
Saving Sagamore, Maryland Life, May/June 2008
Maximizing Work Flow, Western Horseman, May 2008
Potential Energy, Western Horseman, April 2008
Good Flow, Western Horseman, April 2008
Site Planning, Western Horseman, March 2008
Sagamore Farm Reborn, Mid-Atlantic Thoroughbred Magazine, February 2008
Lighten Up, Western Horseman, February 2008
Fashionable Fire for the Home, The Remodelers’ Journal, December/January 2008
Hill Country Horse Barn, Western Horseman, January 2008
Equine Design, Estates West, Winter 2008
Second Chances, Green Builder Magazine—Cover Story, December 2007
A Breath of Fresh Air, Western Horseman, December 2007
Barn Rebirth, Best of Southern Living (special issue), Holiday 2007
California Dreaming, Western Horseman, November 2007
Heating Up the Backyard, Garden Compass, September/October 2007
2007 Southern Home Awards, Best Preservation, Southern Living, October 2007
Champagne Barn on a Beer Budget, Everything for Horse and Rider, Summer 2007
Creature Comforts, Stable Management, September 2007
Quiet Impact (Monticule Form), Keeneland Magazine, Summer 2007
Adding On, Stable Management, August 2007
Get Organized: A well-organized tack room is attractive to your clients and allows you to find what you need when you need it, Stable Management, July 2007
55 Tips for Better Barn Function, Dressage Today, May, 2007
Ranch Dressing: Devine Barn as High Fashion Backdrop, Genlux Magazine, April/May, 2007
Horse Heaven, The Austin American Statesman, November 30, 2006
A Barn for Every Budget, Equestrian Magazine, November 2006
An Old Red Barn Gets A New Life, Washington Spaces, Early Winter 2006
A Breed Apart, Austin Home and Living, September/October 2006
Ultimate Horse Barns, Randy Leffingwell, Voyageur Press, 2006
Run-In Shed Makeover, The Horse, May 2006
Turning Old Into NewWeb, Thoroughbred Times, March 2004
A Sunday Horse, Vicky Moon, Capitol Books, Inc., March 2004
Master Planner, The Washington Times, February 17, 2004
Simply Devine, Sidelines Magazine, November 1, 2003
Advantages of an Architect-Designed Barn, Riding Magazine, May 2003
Out of the Box, Home Magazine, April 2003
Design on the Hoof, Washington City Paper, November 22, 2002
Brilliant Moves, Kentucky Herald-Leader, November 8, 2002
A Face Lift, Stable Management, April 2002
Creating a Better Barn, Thoroughbred Times, December 1, 2001
Doing Your Homework Before Building A Farm, The International Equine Journal, Fall 2001
Equinomics: Stall Flooring, The Horse, September 2001
A Brilliant Idea, Keeneland, Summer 2001
So You Want A Farm, The Horse, June 2001
Building a Safe Breeding Facility, Horsecity.com, April 2001
Building Barns in Albemarle, Albemarle, April/May 2001
Barns By Blackburn, Whoanews.com, January 2001
Middleburg Mystique, Vicky Moon, Capital Books, Inc., September 2001
Putting Your Mare Under Lights, Warmblood Magazine, November/December 2000
Parade of Barns, Polo Players Edition, July 2000
To Buy or Build, Thoroughbred Times, September 25, 1999
Field of Dreams, Horse Show Magazine, July/August 1999
Taj Mahorse, Polo Players Edition, July 1999
Blackburn Architects Builds Area Barns, Keswick Life, May 1999
Home Sweet Home, The Horse, May 1999
Bungalow: American Restoration Style, by Jan Cigliano, (Salt Lake City: Gibbs-Smith Publichers), 1998
Housing Your Horse, The Horse, September 1998
Riding High, Elle Decor, August/September 1998
Kingdom for a Horse, Town and Country, April 1998
Dream Stable, The Blood Horse, March 14, 1998
Morven Stud: Age-old Virginia Farm Builds Toward Future, Mid-Atlantic Thoroughbred, February 1998
Breeding Facilities, The Horse, January 1998
Barns East and West, Wood Design & Building, Autumn 1997
Variety is the Spice of Riding Arena Design, Rural Builder, May 1997
Building Your Dream, In & Around Horse Country, Oct/Nov 1996
Rhapsodies In Blueprint, SPUR, March/April 1996
Take Stock of Design to Eliminate Common Hazards, The Maryland Horse, Oct/Nov 1995
Born Again, The Washington Post Magazine, October 1, 1995
Horse Sense: The New Breed of Barn, The Washington Post, February 18, 1995
Saints Preserve Us” A Timely Addition, Church of St. Stephen Martyr’s New Recovery, The Washington Post, August 14, 1993
Dream Schemes, Remodeling Ideas, Spring 1993
Food Retail Design and Display, Martin M. Pegler, Editor, New York: Retail Reporting Corporation, 1993
Designing Horsemen, SPUR, Sept/Oct 1991
Thoroughbred Landscape, Landscape Architecture, June 1991
Will and Sarah Farish’s Lane’s End Farm, SPUR, Nov/Dec 1990
Back Porches Make a Comeback, Washington Home, June 15, 1989
As a child until the age of 3 or 4, I lived in Bethlehem, PA. I don’t have a lot of memories of it, but my dad tells the story of when he and my uncle built the deck on our house, and I, at age 3, stood outside with my arms crossed and pointed at things, giving direction. They thought it was hysterical. Dad always tells that story when people ask why I became an architect. If it was a job where, “you were going to stand around and tell someone how to building something, Matt was going to be good at it.”
Eventually, we moved to the Philadelphia suburbs and that’s where I lived until college. It looked like a generic suburban development in what had once been a farming area. There were a lot of kids my same age, and a big yard to play in. Behind our house was this old barn. I never made the connection until after I started working at Blackburn, but the farmer who owned it was friendly to the neighborhood kids, and we used to go exploring through that barn all the time. As we got to be teenagers and we built skateboarding ramps or hockey nets or whatever, he let us dig stuff out of the barn and use it. It was a beautiful old building because it was all mortise-and-tenon construction. There were no nails. I’m sure that was an early influence on my love for old timber structures. Good memories. For a few years, he kept retired racehorses, and they seemed to enjoy eating our garden over the fence.
How did Clemson happen?
I completed my undergraduate study in DC at Catholic University, graduating in May, 2010. Afterwards, I moved back to Philadelphia for about four months – the job market was tough – and worked part-time. In my spare time, I helped my friend Dan – who we’ll probably talk about when we get to family – renovate a house. It was a chance to apply some of what I had been learning in school. We made a mess; we probably did some things terribly wrong, but it was fun.
Then I came back to DC, worked for John for four years, and as I started to take on more responsibility I felt that it was time to get my Master’s degree because I was certain this was what I wanted to do. I looked for a school that was somewhere different and was certain that I would go to school in Chicago, until I visited Clemson and found it… unique. Perhaps because it was kind of rural. I had gotten used to city life, I think, and the small college town felt like a setting where I could focus academically. Also, Clemson offered two semesters off campus (I chose to visit Barcelona and Charleston), which were additional learning contexts; again, something different.
In addition to your Master’s degree, you met your fiancé at Clemson.
Jenny and I met the first day. At orientation, I met a few people in my program, one of whom was Jenny’s roommate. Jenny walked up beside me and we just clicked. I texted my friend Dan that day and kind of as a joke told him I’d fallen in love. Jenny and I have been together ever since, and will get married this summer. She grew up in Mississippi and comes across as a sweet, soft-spoken person, but when she gets wound up, watch out. We fit together well.
Let’s talk about how family plays such a big part in your life. You’re a very together person, so that must come from your upbringing.
Totally unbiased, my family is very special. I have two brothers, Mark and Shane, plus Dan, so that’s really three brothers. One sister, Megan. And now I have Jenny, and her family, joining mine. Family has always been a constant through my life. It’s not always been simple. As with all families, there’s some complexity to it, but my siblings and I are very close. Doesn’t mean we always agree; we certainly fought a lot growing up, but we are inseparable, and super weird, when do get together. When we’re around each other, we can be a bit overwhelming. Each of us is uniquely humorous and witty, and sometimes too clever for their own good. As for having it together, a lot of that is on my mom and dad. When I turned 14 I was told to find a job, so I started working in a restaurant. I give my mom and dad a ton of credit for pushing me. Early on I learned to balance friends, life and work. I’ve tried to maintain that ever since.
And the unique studio of Blackburn Architects fits your work life?
John has allowed me to take on a lot of responsibility. That’s huge, and particularly relevant to why I came back this past summer after finishing at Clemson. It’s tough to give an impression to someone in half an hour or an hour, but in job interviews I felt like other architecture firms didn’t get a full picture of who I was. They were just trying to fill a seat. Here, I’m encouraged to try things. I’ve been allowed to fail. Maybe not fail, but make some mistakes so that I can improve. It’s how I’m learning and growing professionally. John, and Ian, challenge the way I do things, and encourage me to defend my view. When there’s that level of mutual respect, you really feel motivated when you come into work each day.
As a young architect, do you worry about the future of the profession?
Sadly, architects in the media are often portrayed as having a kind of elitism. It’s a shame, and not true to what I’ve found in the profession. I know that small interventions can happen at an affordable price that can do a lot for quality of life. On the positive side, there’s so much information available and so many things we can now do, that, coupled with the ambition of young architects, suggests an exciting future. Growing out of our educational backgrounds that expose us to some of the more complex social and cultural challenges of our world, young professionals are finding new ways to innovate. Sustainable practice models are one example. You can also start to look at what it means to build sustainably, beginning with our post-war, and even more recent, building stock and how you can repurpose these buildings to avoid throwing the material in a landfill. Simply using green materials in a new building misses the bigger picture. We aren’t there yet, but these societal challenges inspire me.
Sports buff? Leave us with one nugget of a passion for something that’s not architecture.
I’ll give you two. Sports are one, specifically soccer. Jenny and I have a friendly rivalry. We play on the same rec team, but we follow rival pro clubs. It makes the house kind of fun on matchdays. Locally, we’re big fans of DC United. It’s an experience to go be a part of a fan group at the games; you cheer and jump up and down and act ridiculous.
The other passion is cycling. I bike to work every day, rain or shine. It gets me going in the morning. After 20 minutes of riding through the city I’m awake and ready to go.
Lastly, let’s talk LEGO, because we must.
Yep, I still play with LEGOs. There’s a Lego model of one of our Greenbarns on my desk that I threw together one day. I would like to think that 12-year-old Matt would be proud that I haven’t lost the love for playful exploration that drives me.